These are instructions on how to flash or install stock firmware (ROM) on devices powered by RockChip Chipset using the RockChip Batch Tool.

Caution: Flashing or installing firmware using the RockChip Batch Tool will wipe the data from the device. Therefore, we recommend you take a backup of your data before using the tool.

Install .img Firmware using the RockChip Batch Tool

  1. Download and install Rockchip Driver Assistant on the computer. If in case, RockChip Drivers are already installed on the computer, then SKIP this step.
  2. USB Logo
  3. Download and extract RockChip Batch Tool on the computer. After Extracting the tool, you will be able to see the following files:
  4. RockChip Batch Tool Files
  5. Open RKBatchTool.exe to Launch the Tool:
  6. RockChip Batch Tool Open
  7. Once the tool is launched, you will be able to see the following window:
  8. RockChip Batch Tool
  9. Click on the Browse button and Locate the Firmware (.img based) on the computer:
  10. RockChip Batch Tool Browse RockChip Batch Tool Load Firmware
  11. Once you have successfully Loaded the firmware, you will be able to see the Loading firmware Finished message on the tool:
  12. RockChip Batch Tool Firmware Loaded
  13. Turn Off the Device:
  14. Power Off
  15. Press and Hold Volume UP Key on the Device and Connect it to the computer using the USB cable.
  16. Mobile USB Computer
  17. Do not release the Volume UP Key on the device until Icon 1 turns Green in Color:
  18. RockChip Batch Tool Device Added
  19. Once the tool successfully detects the device, Click on the Restore button to begin the flashing or installation process:
  20. RockChip Batch Tool Restore
  21. Now, RockChip Batch Tool will flash or install the firmware (ROM) on the device (flashing usually takes 4-6 minutes to complete):
  22. Once the flashing process is completed successfully, will be able to see Upgrade/Restore Done Success message:
  23. RockChip Batch Tool Success
  24. Close RockChip Tool by clicking on the Exit button:
  25. RockChip Batch Tool Exit
  26. Disconnect the Device from the Computer and Restart it.
  27. Disconnect Mobile Computer

    Congratulations! You can now use your Mobile Device without facing any issues.

Notes

[*] Cation: Flashing or installing the firmware using the RockChip Flash Tool will wipe the data from the device. Therefore, we recommend you take a backup of your data before using the tool.

[*] RockChip Driver: If you are looking for the RockChip Driver compatible with the RockChip Tool, then head over to the Download RockChip Driver Assistant page.

[*] Alternative Tool: RockChip Factory Tool is the best alternative, which allows you to flash or install .img firmware on any RockChip Device.

[*] Credits: RockChip Batch Tool is created and distributed by Fuzhou RockChip Inc. So Full credit goes to them for sharing the tool for free.