These are instructions on how to remove or bypass the Lava Z50 FRP protection using the SP Flash Tool on Windows Computer.

Caution: Removing or bypassing the FRP protection using the SP Flash Tool may wipe/delete the device’s data. Therefore, we aren’t responsible for any data loss on the device.

Remove Lava Z50 FRP using SP Flash Tool

  1. Download and install MediaTek Drivers on the Computer. If in case Mediatek Drivers are already installed on the computer, then SKIP this step.
    2. USB Logo
  2. Download and Extract the Lava Z50 FRP Remove File on the computer. After Extracting the Lava Z50 FRP File, you will be able to see the following files:
    3. Lava Z50 FRP
  3. Download and Extract the latest version of SP Flash Tool on the Computer. After Extracting the SP Flash Tool on the Computer, you will be able to see the following files:
    4. SP Flash Tool Extracted Files
  4. Open Flash_Tool.exe.
    5. Open SP Flash Tool
  5. Once SP Flash Tool is Launched, Click on the Download Agent Choose button and Select the Da_SESEC.bin (found in the SP Flash Tool Folder).
    6. sp flash tool download agent sp flash tool download agent da swsec
  6. Click on the Scatter Loading Button and Load the Lava Z50 Scatter File (found in the extracted file in Step#2).
    7. sp flash tool da swsec scatter lava z50 frp scatter
  7. Click on the Format Menu.
    8. lava z50 sp flash tool format menu
  8. Under Format Menu, select Manual Format Flash.
    9. sp flash tool manual format flash
  9. Now, Set the Following parameters: Region: EMMC_USER, Begin Address[HEX]: 0x6a00000, Format Length[HEX]: 0x100000.
    10. MT6737M 0x6A00000 0x100000 SP Flash Tool
  10. Click on the Start Button:
    11. MT6737M 0x6A00000 0x100000 Start
  11. Connect your Device to the Computer using the USB Cable (make sure the device is Power Off). After connecting the device to the computer, Press Volume Down and Up Keys on your Smartphone to get it detected by the SP Flash Tool.
    12. Mobile USB Computer
  12. Once SP Flash Tool is able to detect the device, the flashing process will start automatically and may take up to 5 minutes to complete. Once the Flashing process is completed, you will be able to see the Green Tick at the End.
    13. MT6737M 0x6a0000 0x100000 Success
  13. Now, Close the SP Flash Tool and disconnect your device from the computer.
    14. Disconnect Mobile Computer

    Congratulations! Now, Restart the Device and you won’t be facing the FRP protection on the device.

Notes

[*] Caution: Removing the FRP (factory reset protection) from the Android Device will wipe the data from the device. Therefore, we recommend you take a backup of your data before following the tutorial above.

[*] Alternative Tool: SP Multiport Download Tool is the alternative Flash Tool which can be used to flash or install the Scatter Firmware.

[*] Lava Stock Firmware: If you are looking for the original firmware for your device, then head over to Download Lava Stock Firmware page.

[*] Lava USB Driver: If you are looking for the original USB Driver for your device, then head over to Download Lava USB Driver page.

[*] Credits: The FRP file shared above is submitted by Gsm Abdullah. So, full credit goes to him for sharing the File for free.