On this page, we have shared the Phicomm Stock Rom (Original firmware) for all Phicomm Smartphone and Tablets.
All the following Phicomm Stock Rom (zip file) contains original Phicomm USB Driver, Flash Tool and the Flash File. After Downloading the firmware, follow the instruction manual to flash the firmware on your device.
Model: Phicomm C230
Country: All
Android Version: 4.3
Download Size: 248 MB
Model: Phicomm C230W
Country: All
Android Version: 4.3
Download Size: 263 MB
Model: Phicomm C730lW
Country: All
Android Version: 4.4.2
How to Flash: Read Instructions
Download Size: 771 MB
Model: Phicomm C6051
Country: All
Android Version: 6.0
How to Flash: Read Instructions
Download Size: 1 GB
Model: Phicomm Clue 630
Country: All
Android Version: 4.4.2
How to Flash: Read Instructions
Download Size: 523 MB
Model: Phicomm E550W
Country: All
Android Version: 4.3
Download Size: 289 MB
Model: Phicomm E653
Country: All
Android Version: 5.1
How to Flash: Read Instructions
Download Size: 769 MB
Model: Phicomm E5051
Country: All
Android Version: 7.0
How to Flash: Read Instructions
Download Size: 1 GB
Model: Phicomm FWS710
Country: All
Android Version: 4.0.4
Download Size: 119 MB
Model: Phicomm i700W
Country: All
Android Version: 4.0.4
Download Size: 186 MB
Model: Phicomm i803WA
Country: All
Android Version: 4.1.2
Download Size: 277 MB
Model: Phicomm i810T
Country: All
Android Version: 4.2.1
How to Flash: Read Instructions
Download Size: 343 MB
Model: Phicomm K390W
Country: All
Android Version: 4.1.2
Download Size: 180 MB
Model: Phicomm P660
Country: All
Android Version: 4.4.2
Download Size: 500 MB
Model: Phicomm P660L
Country: All
Android Version: 4.4.4
Download Size: 428 MB
Model: Phicomm P660LIN
Country: All
Android Version: 4.4.4
How to Flash: Copy the update.zip file to the phone SD and flash it through the stock recovery mode.
Download Size: 500 MB
Model: Phicomm X130V
Country: All
Android Version: 4.1.2
Download Size: 297 MB
Model: Phicomm X130W
Country: All
Android Version: 4.4.2
Download Size: 314 MB
Readme Once:
[*] After flashing (installing) the Phicomm Stock ROM on your device, you may need to flash (install) the IMEI using the IMEI tool provided with the firmware file. If you are going to flash the IMEI, then make sure to flash the Original IMEI that comes with your device.
[*] Phicomm USB Driver: If you are looking for the original USB Driver, then head over to the Phicomm USB Driver page.
[*] Request Firmware: If you are looking for any specific firmware that is not listed above, then you can request it through the comment box below (do not request firmware through the contact page or else it will be ignored).