These are instructions on how to use the Realme Flash Tool to flash or install .ofp firmware on the Realme and Oppo Devices.

Requirements: You should unlock your Realme Device bootloader before following the tutorial below. Realme Flash Tool will not work on Locked bootloader devices.
Caution: Flashing or installing .ofp firmware using the Realme Flash Tool will wipe the data from the device. Therefore, we recommend you backup your data before using the tool.

Flash or install .ofp Firmware using the Realme Flash Tool

  1. Download and install the Google ADB Drivers on the Windows Computer. If in case ADB drivers are already installed on the computer, then SKIP this step.
    2. USB Logo
  2. Download Stock Firmware (.ofp based) of your Realme Device and extract it on the computer (if in case you have already downloaded the Stock Firmware, then SKIP this Step or else you can find the Stock Firmware on Oppo Stock ROM or through Google).
    3. download
  3. Now, Extract Realme Flash Tool on the computer (assuming you have already downloaded it; if not then Download Realme Flash Tool). Once you have extracted the tool, you will be able to see the following files:
    4. Realme Flash Tool Files
  4. Open Realme Flash.exe to Launch the tool:
    5. Realme Flash Tool Open
  5. Once the Flash Tool is launched, you will be able to see the following window:
    6. Realme Flash Tool
  6. Click on the Browse button:
    7. Realme Flash Tool Browse
  7. Locate the .ofp firmware on the computer:
    8. Realme Flash Tool Select ofp
  8. Switch off the Mobile Device > Press and Hold Power and Volume Down key simultaneously to enter the fastboot mode.
    9. Realme Fastboot
  9. Connect your Device to the Computer using the USB cable:
    10. connect mobile computer
  10. Click on the Loading button to allow the flash tool to detect the connected device.
    11. Realme Flash Tool Loading Device
  11. Click on the Flash button:
    12. Realme Flash Tool Start
  12. Click on the Confirm button to begin the flashing or installation process:
    13. Realme Flash Tool Start Confirm
  13. Once the flashing or installation process is completed, you will be able to see the Flashing Completed message on the tool.
    14. Realme Flash Tool Success

    Congratulations! Now, Close the Tool on the computer and Disconnect the device and Restart it.

Notes

[*] Caution: Flashing or installing firmware using the above method will wipe the data from the device. Therefore, we recommend you backup your data before following the above tutorial.

[*] Realme Firmware: If you are looking for the Realme Stock Firmware, then head over to the Realme Stock Firmware page.

[*] Realme USB Driver: If you are looking for the Realme USB Driver, then head over to the Realme USB Driver page.

[*] Credits: Realme Tool is created and distributed by Guangdong Oppo Mobile Telecommunications Corp., Ltd. So, full credit goes to them for sharing the Application for free.