On this page, we have shared the Hyve Stock Rom (Original firmware) for all Hyve Smartphone and Tablets.
All the following Hyve Stock Rom (zip file) contains original Hyve USB Driver, Flash Tool and the Flash File. After Downloading the firmware, follow the instruction manual to flash the firmware on your device.
Hyve B1 HMTB14G Stock Firmware (Flash File)
Model: Hyve B1 HMTB14G
Country: All
Android Version: 5.1
How to Flash: Read Instructions
Download Size: 672 MB
Hyve BU01 Stock Firmware (Flash File)
Model: Hyve BU01
Country: All
Android Version: 5.1
How to Flash: Read Instructions
Download Size: 1 GB
Hyve Pryme 01 Stock Firmware (Flash File)
Model: Hyve Pryme 01
Country: All
Android Version: 6.0
How to Flash: Copy the update.zip file to the phone SD and flash it through the stock recovery mode.
Download Size: 3 GB
Hyve ST01 Stock Firmware (Flash File)
Model: Hyve ST01
Country: All
Android Version: 5.1
How to Flash: Read Instructions
Download Size: 482 MB
Readme Once:
[*] After flashing (installing) the Hyve Stock ROM on your device, you may need to flash (install) the IMEI using the IMEI tool provided with the firmware file. If you are going to flash the IMEI, then flash the Original IMEI that comes with your device.
[*] Hyve USB Driver: If you are looking for the original USB Driver, then head over to the Hyve USB Driver page.
[*] Request Firmware: If you are looking for any specific firmware that is not listed above, then you can request it through the comment box below (do not request firmware through the contact page, or else it will be ignored).